FENDT F Series Fault Codes

Tractor: FENDT - series 200 V,F,P Vario

207 Chassis number 232(V) 239(F)

208 Chassis number 233(V) 240(F)

209 Chassis number 234(V) 241(F) 241(P)

210 Chassis number 235(V) 242(F) 252(P)

211 Chassis number 236(V) 243(F) 253(P)

Tractor: FENDT - series 200 S Vario

Tractor: FENDT - series 300 Vario

Tractor: FENDT - series 500 Vario

Tractor: FENDT - series 500 Vario

Tractor: FENDT - series 700 Vario

Tractor: FENDT - series 800 Vario

Tractor: FENDT - series 900 Vario

Tractor: FENDT - series 1000 Vario

Fault code 00.0.00 

00.0.0A A050 basic control unit ECU Bus fault, el. valve no display Function non-operable,

00.0.0B A050 basic control unit ECU Teach-in function BUS fault no display Function non-operable,

00.0.0D A101 VarioDoc ECU VarioDoc BUS fault no display Function non-operable,

00.0.0E A102 VarioGuide GNSS ECU VarioGuide BUS fault no display Function non-operable,

00.0.0F A111 central electrical system ECU Central electrical system BUS fault no display Function non-operable

00.0.10 A050 basic control unit ECU Air conditioning system BUS fault no display Function non-operable

00.0.11 A050 basic control unit ECU Electrical control panel BUS fault no display Function non-operable

00.0.15 A050 basic control unit ECU Bus fault, VA suspension no display Function non-operable

00.0.16 A050 basic control unit ECU Auto mode EPC CAN BUS fault no display Function non-operable,

00.0.17 A050 basic control unit ECU control unit Bus fault, Vario

00.0.18 A050 basic control unit ECU Electro-hydraulic steering (EHL) BUS fault

00.0.19 A050 basic control unit ECU ISO task BUS fault

00.0.1D A050 basic control unit ECU BUS fault EDC17 reports incorrectly to instrument panel

00.0.1F A050 basic control unit ECU Fault management BUS fault

00.0.21 A050 basic control unit ECU On-board computer BUS fault

00.1.4D A007 instrument panel Checksum Menu images, instrument panel memory faulty

00.1.4E A007 instrument panel Warning images, instrument panel memory faulty Checksum 

00.1.4F A007 instrument panel Checksum GD table  Display fault in instrument panel

00.1.50 A007 instrument panel VDO instrument panel EEPROM not programmed

00.1.54 B060 compressed air supply sensor (circuit 1) Signal fault Sensor faulty until the next cold start 4WD is switched on Compressed air display, Function non-operable

00.1.55 B084 hydraulic oil level sensor Signal fault Sensor faulty 

00.1.59 B007 immersed tube fuel-level sensor Signal fault Sensor faulty, No display

00.1.5A B019 compressed air supply sensor (circuit 2) Signal fault Sensor faulty, until the next cold start 4WD is switched on Compressed air display, Function non-operable

00.1.71 A128 control panel for right/left dashboard Enter key Button non-operable

00.1.72 A128 control panel for right/left dashboard ESC button Button non-operable 

00.1.73 A128 control panel for right/left dashboard Up button Button non-operable

00.1.74 A128 control panel for right/left dashboard Down button Button non-operable

00.1.75 A128 control panel for right/left dashboard Enter button pressed > 30s or button released Button non-operable

00.1.76 A128 control panel for right/left dashboard Esc button pressed > 30s or button released Button non-operable

00.1.77 A128 control panel for right/left dashboard Up button pressed > 30s or button released Button non-operable

00.1.78 A128 control panel for right/left dashboard operated Down button pressed > 30s or button released Button non-operable

00.1.A8 B060 compressed air supply sensor (circuit 1) Compressed air supply circuit 1, vacuum until the next cold start 4WD is switched on

04.1.04 B017 clutch pedal sensor Signal fault Sensor faulty, Loss of comfort control/function in final speed control; No cruise control function

04.1.05 B039 high-pressure sensor 2 Signal fault Sensor faulty,

04.1.06 B055 foot throttle sensor Signal fault Sensor faulty,

04.1.07 B008 high-pressure sensor 1 Signal fault Sensor faulty,

04.1.08 B016 travel range detection sensor Signal fault Sensor faulty, TMS is switched of

04.1.19 A050 basic control unit ECU Error on reading-in throttle pedal parameters

04.1.20 A100 MFA, multifunction armrest EEPROM checksum incorrect or not calibrated Throttle pedal resolution potentiometer

04.1.22 A100 MFA, multifunction armrest Signal fault Throttle pedal resolution potentiometer faulty, TMS is switched of

04.1.23 A100 MFA, multifunction armrest faulty Joystick signal "Tempomat cruise control ON"

04.1.24 S080 hand brake switch Signal fault Faulty switch,

04.1.25 A100 MFA, multifunction armrest Joystick "F/R quick reverse" signal faulty TMS is switched of

04.1.26 A100 MFA, multifunction armrest Signal fault Accelerator pedal mode button faulty, inoperable Throttle pedal mode

04.1.28 A009 actuator unit VR incremental encoder Faulty path signal  Continuation in emergency mode possible

04.1.29 A100 MFA, multifunction armrest Joystick signal "park position" faulty TMS is switched of

04.1.2A B015 bevel pinion sensor Direction signal faulty Sensor faulty

04.1.2B A100 MFA, multifunction armrest Travel speed range selection button I/II Faulty button, Signal fault

04.1.2C A100 MFA, multifunction armrest Neutral/Active Standstill button Faulty button, Signal fault

04.1.2D S157 forward - reverse shuttle switch stalk Forward/reverse shuttle switch on control

Faulty forward travel signal TMS is switched of

04.1.2E S157 forward - reverse shuttle switch stalk Forward/reverse shuttle switch on control 

Faulty reverse travel signal TMS is switched of

04.1.2F A100 MFA, multifunction armrest Joystick Joystick signal "v-" faulty (joystick to rear)

Continuation in emergency mode possible

04.1.31 B014 collecting shaft sensor Direction signal faulty Sensor faulty,

04.1.32 A100 MFA, multifunction armrest Joystick activation button Faulty button, signal fault

04.1.33 A100 MFA, multifunction armrest Faulty joystick signal "v+" (joystick forward)

04.1.3D A050 basic control unit ECU power due to an exhaust system fault) (Error occurs when there is a reduction in engine Derating parameter checksum error

04.1.3E A050 basic control unit ECU (Restrictions due to exhaust system) Derating active

04.1.42 B014 collecting shaft sensor Speed signal faulty Sensor faulty,

04.1.45 B015 bevel pinion sensor (=road speed) Speed signal faulty Sensor faulty,

04.1.46 Y004 clutch/turbo-clutch solenoid valve opened Pressure does not drop when the TK valve is 

04.1.47 B016 travel range detection sensor Y002 travel speed range I solenoid valve Y003 travel speed range II solenoid valve. Travel speed range selector: Does not come out of gear when travel speed range valve is energized

04.1.48 B016 travel range detection sensor Y002 travel speed range I solenoid valve Y003 travel speed range II solenoid valve Travel speed range selector: Cannot shift to neutral

04.1.49 S017 filter contamination switch Plausibility error 

04.1.50 S017 filter contamination switch Filter clogged

04.1.53 B009 discharge temperature sensor "Transmission oil temperature more than 110°C"

04.1.56 S017 filter contamination switch Signal line fault Faulty switch,

04.1.58 Transmission hydraulics 30% from setpoint value Transmission output speed deviates by more than Transmission slip monitor

04.1.59 A050 basic control unit ECU Emergency mode has been activated manually

04.1.61 A050 basic control unit ECU Y002 travel speed range I solenoid valve Faulty actuation of travel speed range I valve

04.1.62 A050 basic control unit ECU Y003 travel speed range II solenoid valve Faulty actuation of travel speed range II valve

04.1.63 A050 basic control unit ECU Y005 speed governor solenoid valve faulty Valve actuation for mechanical speed limiter 

04.1.64 A050 basic control unit ECU Y004 clutch/turbo-clutch solenoid valve fuse F56 faulty Turbo-clutch solenoid valve actuation faulty,

04.1.69 S053 driver presence switch message" function) (Error code is output by the "hand brake warning Seat switch faulty

04.1.70 A100 MFA, multifunction armrest Cruise control button, C1 Signal fault Faulty button, 

04.1.71 A100 MFA, multifunction armrest Cruise control button, C2 Signal fault Faulty button,

04.1.76 S047 engine brake switch Signal fault Switch faulty or communication error to EDC

04.1.77 A100 MFA, multifunction armrest Joystick acceleration rate I…IV Signal fault

04.1.78 S053 driver presence switch Signal fault Faulty switch

04.1.79 A050 basic control unit ECU (Current > 2500 mA or short circuit) Output for reverse warning signal not OK

04.1.82 B014 collecting shaft sensor B015 bevel pinion sensor B016 travel range detection sensor (=speeds do not match) fault output as of 5 km/h Plausibility error 

04.1.83 B014 collecting shaft sensor B015 bevel pinion sensor Fault output as of 5 km/h (=speeds do not match) Plausibility error

04.1.84 A100 MFA, multifunction armrest default position) Joystick switch (V, R, VR, cruise control, (=signals do not match) Plausibility error

04.1.85 B085 camshaft speed sensor B088 crankshaft speed sensor decrease is outside limits. speed curves. Output speed increase or Engine speed sensors do not supply plausible

04.1.86 B008 high-pressure sensor 1 B039 high-pressure sensor 2 Plausibility error in both pressure sensors

04.1.87 S157 forward - reverse shuttle switch Plausibility error at F/R switch, quick reverse

04.1.89 B009 discharge temperature sensor Plausibility error, transmission temperature

04.1.8A B017 clutch pedal sensor S074 starter lockout switch/clutch pedal limit switch Plausibility error; electrical clutch pedal (TK line  not opened when clutch pedal depressed)

04.1.8F Currently selected tire circumference is too small 

04.1.94 A050 basic control unit ECU A100 MFA, multifunction armrest Faulty CAN communication between e-box and CAN joystick

04.1.A1 A009 actuator unit Turn angle is not reached within 2 seconds.

04.1.A2 A009 actuator unit A050 basic control unit ECU CAN Bus actuation fault

04.1.A3 A009 actuator unit  Fault or logic error in incremental sensor signal (actual position signal)

04.1.A4 A009 actuator unit Fault or logical error signal in EST

04.1.A5 A009 actuator unit  Initial reference (=zero position) could not be found during ignition ON

04.1.A6 A009 actuator unit Reference point signal fault during operation

04.1.B0 All bus users TeachIn fault Initialisation error

04.1.B1 A050 basic control unit ECU  Fatal error, range change (e.g. valve fault) TeachIn fault

04.1.B5 A050 basic control unit ECU Checksum error rate parameters, quick reverse 

for Tractor Management System (TMS)

04.1.B7 B009 discharge temperature sensor Incorrect checksum

04.1.CB A100 MFA, multifunction armrest  Warning message: Travel range button "under excessive pressure"

04.1.CF A050 basic control unit ECU Internal error, A050 basic operating system

04.1.D5 A050 basic control unit ECU Communication error during workshop mode

04.1.E1 A050 basic control unit ECU  not plausible or read Traction control regulator parameters (ML transmission adjustment)  incorrectly

04.1.E2 A050 basic control unit ECU  Traction control regulator parameters not plausible (B008/B039) or read incorrectly.

04.1.E3 A050 basic control unit ECU  Checksum error, parameter for throttle pedal mode

04.1.E5 A050 basic control unit ECU Checksum error for range control, speed limiting  valve etc. faulty

04.1.E6 A050 basic control unit ECU Incorrect checksum, load limit control parameters t

04.1.E7 A050 basic control unit ECU Incorrect checksum, joystick parameters

04.1.E9 A050 basic control unit ECU Speed selection parameters incorrect

04.1.EA A050 basic control unit ECU  Error in checksum parameter for transmission teeth number

04.1.EB B016 travel range detection sensor  Checksum error or range control calibration missing

04.1.EC B055 foot throttle sensor  No calibration or drifted, changed values

04.1.ED B017 clutch pedal sensor No calibration or drifted, changed values

04.1.EE A050 basic control unit ECU Transmission characteristic No calibration or drifted, changed values

04.1.EF A050 basic control unit ECU Turbo-clutch characteristic No calibration or drifted, changed values

04.1.F0 A050 basic control unit ECU  Checksum parameter for transmission calibration incorrect

04.1.F1 A050 basic control unit ECU  Checksum parameter for stationary control incorrect

04.1.F2 A050 basic control unit ECU Characteristic offset deviation outside permitted range 

04.1.F3 A050 basic control unit ECU Ratio restriction checksum faulty

04.1.F4 A050 basic control unit ECU EXT memory could not be reserved

04.1.F5 A050 basic control unit ECU  Checksum error, "instance for selecting the optimum speed source" parameter

04.2.40 B016 travel range detection sensor Transmission travel speed range is not recognized correctly

04.2.41 A050 basic control unit ECU B009 discharge temperature sensor Condition for switching switch level not fulfilled

04.2.51 B009 discharge temperature sensor Transmission oil temperature >95°C

04.2.52 B009 discharge temperature sensor Transmission oil temperature >105°C 

04.2.D0 A050 basic control unit ECU Workshop mode: Ratio restriction active

Fault code 0A.1.00

X stands for the valve number, e.g. 0A.1.10 = position 1 valve does not report to CAN or 0A.1.37 = position pickup sensor error in position 3 valve 

0A.1.X0 Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray) (X=valve number) Valve does not report to CAN  

0A.1.X1 Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray) (X=valve number) EEPROM inconsistent

0A.1.X2 Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray) (X=valve number) Undervoltage (where U < 8V) 

0A.1.X3 Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray) (X=valve number) (where U > 18 V) Overvoltage, safe

0A.1.X4 Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray)

 Valve spool stops short (frequent cause: control pressure dips briefly or oil too viscous at very low  temperatures) (X=valve number)

0A.1.X5 Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray) (X=valve number) High overvoltage (> 45V)

0A.1.X6 Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray) (X=valve number) Final stage error (pilot control solenoid valve)

0A.1.X7 Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray) (X=valve number) Position pickup sensor error 

0A.1.X8 Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray)

Valve actuator does not return to neutral position (frequent cause: valve actuator mechanically jams (pilot control or main actuator) caused by contamination in hydraulics area)(X=valve number)

0A.1.X9 Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray)

Valve actuator not in neutral position when switched on (frequent cause: valve actuator mechanically jams (pilot control or main actuator) caused by contamination in hydraulics area) (X=valve number)

0A.1.XA Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray) Valve spool is deflected too far (X=valve number)

0A.1.XB Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray) 

Floating position is not reached (X=valve number)

0A.1.XC Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray)

Manual actuation (occurs when a valve is deflected Manual actuation (occurs when a valve is from its neutral position)

0A.1.XD Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray) (X=valve number) Pilot control actuator jams

0A.1.XE Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray) (X=valve number) RAM or FLASH test fault

0A.1.XF Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray)

0A.1.XF Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray)

No setpoint message, no configuration message setpoint message not plausible configuration message not plausible Potentiometer/PW error (X=valve number)

0A.1.A2 A050 basic control unit ECU  More valves connected than registered via EOL programming

0A.1.A4 A050 basic control unit ECU  Checksum error when reading the parameters for  valve heating

0A.1.B0 A100 MFA, multifunction armrest Crossgate lever Crossgate lever is not calibrated

0A.1.B1 A100 MFA, multifunction armrest Crossgate lever  Crossgate lever X axis faulty or engaged when ignition switched on

0A.1.B2 A100 MFA, multifunction armrest Crossgate lever  Crossgate lever Y axis faulty or engaged when ignition switched on

0A.1.B3 A100 MFA, multifunction armrest Crossgate lever Crossgate lever missing (both axes) 

0A.1.B5 A100 MFA, multifunction armrest  Joystick center position recognition faulty (electrical fault) or engaged when ignition switched on

0A.1.B6 A100 MFA, multifunction armrest Linear module 1 (rocker) not calibrated

0A.1.B7 A100 MFA, multifunction armrest  Linear module 1 (rocker) faulty or engaged when ignition switched on

0A.1.B8 A100 MFA, multifunction armrest Linear module 2 (rocker) not calibrated 

0A.1.B9 A100 MFA, multifunction armrest  Linear module 2 (rocker) faulty or engaged when ignition switched on

0A.1.BA A100 MFA, multifunction armrest Linear module 3 (rocker) not calibrated 

0A.1.BB A100 MFA, multifunction armrest  Linear module 3 (rocker) faulty or engaged when ignition switched on

0A.1.BC A100 MFA, multifunction armrest Linear module 4 (rocker) not calibrated 

0A.1.BD A100 MFA, multifunction armrest Faulty linear module 4 (rocker)

0A.1.C0 A100 MFA, multifunction armrest MFA not fitted

0A.1.C1 A050 basic control unit ECU A100 MFA, multifunction armrest MFA GD fault in button used by hydraulics

0A.1.C2 A100 MFA, multifunction armrest Faulty MFA button (total lock) 

0A.1.C6 A128 control panel for right/left dashboard Cargo front loader tool lock button Signal fault Faulty button,

0A.1.C7 A128 control panel for right/left dashboard Cargo front loader suspension button Signal fault Faulty button

0A.1.C8 Cargo front loader tool lock solenoid valve Solenoid valve faulty

0A.1.C9  Cargo front loader suspension solenoid valve Solenoid valve faulty

0A.1.CA A050 basic control unit ECU Steering axle checksum incorrect

0A.1.CD R019 front-loader detection resistor (MK) X4006 - Cargo cable coupling Front loader detection input error 

0A.1.CE Auxiliary control units Valve actuator does not return to neutral position

0A.1.CF Auxiliary control units Floating position is not reached

0A.1.D0 A100 MFA, multifunction armrest Button for hydraulic circuit 3 Signal fault Faulty button,

0A.1.D1 A100 MFA, multifunction armrest Button for hydraulic circuit 4 Signal fault Faulty button,

0A.1.D2 A100 MFA, multifunction armrest Red raise/lower/floating position button on joystick Signal fault Faulty button,

0A.1.D3 A100 MFA, multifunction armrest Green raise/lower/floating position button on joystick Signal fault Faulty button,

0A.1.D4 S021 external raise front power lift button S022 external lower front power lift button Signal fault Faulty button, Double actuation (button possibly stuck) 

0A.1.D5 S022 external lower front power lift button Signal fault Faulty button

0A.1.D6 S021 external raise front power lift button Signal fault Faulty button,

0A.1.D7 B084 hydraulic oil level sensor Signal fault Sensor faulty,

0A.1.D8 B084 hydraulic oil level sensor Warning, hydraulic oil tank

0A.1.D9 B084 hydraulic oil level sensor Hydraulic oil tank empty

0A.1.DA B013 hydraulic oil temperature sensor Warning, hydraulic oil temperature too high

0A.1.DB B013 hydraulic oil temperature sensor Hydraulic oil temperature too high

0A.1.DC B013 hydraulic oil temperature sensor Warning, hydraulic oil temperature not plausible

0A.1.DD S119 hydraulic oil filter contamination switch Filter clogged

0A.1.DE S119 hydraulic oil filter contamination switch Signal fault Faulty switch,

0A.1.DF Y176 position 1 spool valve (yellow) Y177 position 2 spool valve (blue) Y178 position 3 spool valve (red) Y179 position 4 spool valve (green) Y180 position 5 spool valve (brown) Y182 position 7 spool valve (olive) Y183 position 8 spool valve (gray) Priority volume greater than pump volume

0A.1.E0 A050 basic control unit ECU Steering axle volume greater than pump volume

0A.1.EC Y173 trailer brake release solenoid valve Solenoid valve faulty 

0A.1.ED A128 control panel for right/left dashboard ABV activation button faulty

0A.1.EE Y023 solenoid valve for compressed air pilot control system Solenoid valve faulty

0A.1.F0 Y032 control pressure solenoid valve +UB short circuit

0A.1.F2 Y032 control pressure solenoid valve  Current too high, faulty valve (short circuit to earth)

0A.1.F3 Y032 control pressure solenoid valve Break in wiring

0A.1.F4 Y181 front power lift control valve Short circuit to earth or +UB or break in wiring

0A.1.F5 Y181 front power lift control valve Short circuit to earth or +UB or break in wiring

0A.1.F6 Y060 rear hydraulic oil preheater solenoid valve Actuation fault

0A.1.F7 Y061 middle hydraulic oil preheater solenoid valve Actuation fault

0A.1.F9 Y012 suspension loading/oil preheating solenoid valve Loading valve fault

0A.1.FA S067 external raise valve actuation button Signal fault Faulty button,

0A.1.FB S068 external lower valve actuation button Signal fault Faulty button,

0A.1.FC S067 external raise valve actuation button S068 external lower valve actuation button Double actuation, faulty button, signal fault

0A.1.FD Y082 lock lower link stabilizer solenoid valve Solenoid valve faulty

0A.1.FE Y083 release lower link stabilizer solenoid valve Solenoid valve faulty

0A.2.92 A100 MFA, multifunction armrest Linear module 1 (rocker) stuck

0A.2.93 A100 MFA, multifunction armrest Linear module 2 (rocker) stuck

0A.2.94 A100 MFA, multifunction armrest Linear module 3 (rocker) stuck

0A.2.95 A100 MFA, multifunction armrest Linear module 4 (rocker) stuck

0A.2.96 A100 MFA, multifunction armrest Crossgate lever (horizontal) stuck

0A.2.97 A100 MFA, multifunction armrest Crossgate lever (horizontal) stuck 

0A.2.9A A100 MFA, multifunction armrest  Right joystick actuation, one of the three buttons is stuck

0A.2.9B A100 MFA, multifunction armrest  Left joystick actuation, one of the three buttons is stuck

0A.2.A8 A100 MFA, multifunction armrest Crossgate lever double actuation "yellow"

0A.2.A9 A100 MFA, multifunction armrest Crossgate lever Crossgate lever double actuation "blue

0A.2.AA A100 MFA, multifunction armrest Joystick Joystick double actuation, right

0A.2.AB A100 MFA, multifunction armrest Joystick Joystick double actuation, left

0A.2.AC A100 MFA, multifunction armrest Linear module 1 double actuation (rocker)

0A.2.AD A100 MFA, multifunction armrest Linear module 2 double actuation (rocker)

0A.2.AE A100 MFA, multifunction armrest Linear module 3 double actuation (rocker)

0A.2.AF A100 MFA, multifunction armrest Linear module 4 double actuation (rocker)

0A.2.CB A050 basic control unit ECU Steering axle active

0A.2.CC A050 basic control unit ECU Steering axle not active

Fault code 1D.0.00

 If the following errors occur (1D.0 etc.), they must be deleted in the engine control unit following error correction with SERDIA!

1D.0.09 B086 rail pressure sensor Opening of rail DBV valve recognized

1D.0.40 B102 AdBlue temperature/level sensor Reduction in power as fill level is too low (with warning bleeper)

1D.0.42 AdBlue  Reduction in power due to AdBlue quality (with warning bleeper)

1D.0.44 A099 engine control ECU (EDC 17)  Reduction in power due to incorrect AdBlue  conversion rate (with warning bleeper)

1D.0.46 A099 engine control ECU (EDC 17) Reduction in power as manipulation of the SCR system was detected (with warning bleeper) 

1D.0.62 B086 rail pressure sensor Rail pressure fault

1D.0.A1 B090 oil pressure sensor Engine oil pressure too low

1D.1.00 A099 engine control ECU (EDC 17) Original Deutz error 

1D.1.01 B090 oil pressure sensor Oil pressure outside of setpoint range Broken wire or short circuit.

1D.1.02 B087 fuel low pressure sensor Fuel low pressure outside setpoint range Broken wire or short circuit

1D.1.03 B092 boost pressure/charge air temperature sensor Limits exceeded or Broken wire or short circuit specified values not reached

1D.1.04 B086 rail pressure sensor Rail pressure outside setpoint range Broken wire or short circuit

1D.1.05 B089 engine temperature sensor (Deutz) Coolant temperature sensor: break in wiring or  short circuit. Coolant temperature outside setpoint area

1D.1.07 B085 camshaft speed sensor B088 crankshaft speed sensor  sensor faulty or no signal; camshaft/crankshaft Camshaft sensor faulty or no signal; crankshaft speed signals out of phase

1D.1.08 Y091 fuel dispensing unit B086 rail pressure sensor Rail pressure outside setpoint range Short circuit to battery or earth Dispensing unit not connected, 

1D.1.0A B085 camshaft speed sensor B088 crankshaft speed sensor Value exceeded, pushing mode Engine overspeed

1D.1.0C K063 heater flange relay Actuation faulty Broken wire or short circuit

1D.1.0D S034 coolant level switch Coolant level too low

1D.1.10 B102 AdBlue temperature/level sensor Temperature limit exceeded or not reached Fill level too low, Broken wire or short circuit, 

1D.1.11 Y120 AdBlue metering valve Coolant line to metering valve crushed Nozzle jammed Current value too low Broken wire or short circuit

1D.1.12 A084 AdBlue module General module fault Pressure too low, Return valve fault, Limit exceeded or not reached Current value too low, Broken wire or short circuit, 

1D.1.13 A082 nitrogen oxide NOx sensor 1, upstream of SCR NOx Sensor CAN message faulty Current value too low or wire break, 

1D.1.14 A083 nitrogen oxide NOx sensor 2, down‐ stream of SCR NOx Sensor CAN message faulty Current value too low or wire break

1D.1.15 B236 for 700 series exhaust gas temperature upstream of SCR sensor Limit exceeded or Broken wire or short circuit specified value not reached 

for 500 series

1D.1.15 B244 - Exhaust gas temperature upstream of SCR sensor Limit exceeded or Broken wire or short circuit specified value not reached

1D.1.16 SCR general NOx conversion rate insufficient - - SCR catalytic converter faulty Insufficient AdBlue quality

1D.1.17 A099 engine control ECU (EDC 17) Y095 injector 1 Y096 injector 2 Y097 injector 3 Y098 injector 4 Y100 injector 5 Y101 injector 6 

Misfiring on one or more injectors Broken wire or short circuit

1D.1.19 Y222 Visco fan (Viscotronic) Limits exceeded or Broken wire or short circuit specified values not reached

1D.1.1B A099 engine control ECU (EDC 17) EDC internal error

1D.1.1C M001 starter Terminal 50 signal faulty Broken wire or short circuit 

1D.1.1D DBV rail Pressure-limiting valve (DBV) has reached maximum number of switching operations. DBV has exceeded maximum permitted opening time

1D.1.20 S047 engine brake switch Y170 engine brake solenoid valve Valve or switch wire break or short circuit

1D.1.21 B092 boost pressure/charge air temperature sensor Charge air temperature too high

1D.1.22 B004 vacuum switch (air filter) Air filter contaminated

1D.1.23 A077 immobilizer ECU A099 engine control ECU (EDC 17) No manipulation protection

1D.1.24 A099 engine control ECU (EDC 17) system) Engine starting problems (e.g. fault in injection

1D.1.25 A084 AdBlue module E216 AdBlue suction and return line heater E217 AdBlue pressure line heater Cable iced up, pressure too high or low, heater faulty, return valve jammed.

1D.1.26 A084 AdBlue module Not possible to empty system

1D.1.29 Exhaust gas temperature upstream of turbo Limit value outside setpoint range Broken wire or short circuit, 

1D.1.30 A136 wastegate ECU  CAN message from/to actuator faulty, other actuator error Current value too low or wire break

1D.1.31 B195 AdBlue quality sensor Insufficient AdBlue quality

1D.1.32 B102 AdBlue temperature/level sensor AdBlue level too low

1D.1.34 B192 CSF differential pressure sensor Pressure Broken wire or short circuit difference outside limit value

1D.1.35 A134 exhaust gas recirculation ECU Other actuator fault CAN message from/to actuator faulty, Internal fault, calibration fault,

1D.1.37 B191 exhaust gas pressure upstream of turbo sensor Limit exceeded Broken wire or short circuit

1D.1.38 B193 exhaust temperature upstream of CSF sensor Limit exceeded Broken wire or short circuit

1D.1.39 B194 pressure downstream of CSF sensor Limit exceeded Broken wire or short circuit

1D.1.3A B102 AdBlue temperature/level sensor AdBlue tank temperature not in operating range

1D.1.3B A133 air intake throttle ECU Overcurrent, incorrect angle Broken wire or short circuit 

1D.1.4C (700 series) B236 exhaust gas temperature upstream of SCR sensor Measured value is illogical

1D.1.4C (500 series) B244 - Exhaust gas temperature upstream of SCR sensor Measured value is illogical

1D.1.4E A099 engine control ECU (EDC 17) DPF regeneration monitoring

1D.1.4F A099 engine control ECU (EDC 17) SCR regeneration

1D.1.54 A099 engine control ECU (EDC 17) Temperature outside target range

1D.1.60 B086 rail pressure sensor Leak detected

1D.1.65 B092 boost pressure/charge air temperature sensor Boost pressure outside target range

1D.1.66 A134 exhaust gas recirculation ECU EGR flow

1D.1.68 B218 venturi differential pressure sensor Short circuit to battery or broken wire

1D.1.69 A134 exhaust gas recirculation ECU Actuator blocked or sluggish

1D.1.76 A099 engine control ECU (EDC 17) Y095 injector 1 Y096 injector 2 Y097 injector 3 Y098 injector 4 Y100 injector 5 Y101 injector 6 

Fault in one or more injectors

1D.1.79 B217 temperature downstream of venturi sensor Electrical fault

1D.1.7A B194 pressure downstream of CSF sensor Plausibility error

1D.1.7C B092 boost pressure/charge air temperature sensor Boost pressure too high

1D.1.A5 B089 engine temperature sensor (Deutz) Coolant temperature too high

1D.1.A9 A099 engine control ECU (EDC 17) SCR pressure monitoring/return line SCR lines, 

1D.1.AA A099 engine control ECU (EDC 17) Standstill requested SCR monitoring, crystallization, 

1D.1.AB A099 engine control ECU (EDC 17) Emissions SCR, emissions not met, efficiency test, emissions above upper physical value

1D.1.AC A099 engine control ECU (EDC 17) DPF, ash/soot load of particulate filter, Warning/shut-off threshold for ash load exceeded

1D.1.B2 A099 engine control ECU (EDC 17) Fault in voltage supply

1D.1.B5 Y170 engine brake solenoid valve

1D.1.B6 Y170 engine brake solenoid valve

1D.1.BA A099 engine control ECU (EDC 17) CAN bus fault

1D.2.06 B055 foot throttle sensor Signal does not match idle sensor signal Broken wire or short circuit

1D.2.0B A099 engine control ECU (EDC 17) CAN BUS fault

1D.2.18 B076 exterior temperature sensor Limits exceeded or Broken wire or short circuit specified values not reached

1D.2.1A B091 water in fuel sensor Water level above setpoint range Broken wire or short circuit

1D.2.1E Y169 AdBlue tank heater solenoid valve Valve jammed Broken wire or short circuit

1D.2.1F A077 immobilizer ECU A099 engine control ECU (EDC 17) Immobilizer fault

1D.2.41 B102 AdBlue temperature/level sensor Reduction in power as fill level is too low (without warning bleeper)

1D.2.43 AdBlue (without warning bleeper) Reduction in power due to AdBlue quality

1D.2.45 A099 engine control ECU (EDC 17)  Reduction in power due to incorrect AdBlue conversion rate (without warning bleeper)

1D.2.47 A099 engine control ECU (EDC 17)  Reduction in power as manipulation of the SCR system was detected (without warning bleeper)

1D.2.49 A099 engine control ECU (EDC 17) Torque reduction without fault in order to protect  the engine

1D.2.52 A133 air intake throttle ECU 

1D.2.77 A099 engine control ECU (EDC 17) Y095 injector 1 Y096 injector 2 Y097 injector 3 Y098 injector 4 Y100 injector 5 Y101 injector 6 Fault in one or more injectors

1D.2.AF A099 engine control ECU (EDC 17) Oil change request due to excessively frequent requests for standstill regeneration

1D.2.B3 A099 engine control ECU (EDC 17) Fault in voltage supply 

1D.2.B8 A099 engine control ECU (EDC 17) Ambient pressure

1D.2.F0 A099 engine control ECU (EDC 17)

To compensate for mechanical and electrical tolerances in sensors, the sensors concerned must be calibrated.

If a sensor is replaced, it must also be calibrated.

The following sensors and functions require calibration

1. EPC rear calibration (depth control code 8001 and rear power lift position code 8002) 

2.Front EPC calibration (code 9001 and code 9002)

3.Calibration, crossgate lever (hydraulic auxiliary valves) (code 1001)

4.Calibration of linear modules 1–4; for hydraulic auxiliary spool valves (code 1003–1006)

5.Front axle suspension calibration (code 7666)

6.Steering angle sensor calibration (2401)

7.VarioGuide steering valve calibration (Code 2403)

8.Rear PTO engagement time calibration (code 6034)

9.Front PTO engagement time calibration (code 7034)

10.Drive clutch pedal calibration (code 4001)

11.Hand throttle calibration (code 4002)

12.Travel range selector calibration, (code 4003)

13.Foot throttle pedal calibration (code 4005)

14.Transmission ratio characteristic calibration (code 4007)

15.Turbo-clutch function calibration (code 4009)

16.Accelerator pedal resolution Calibration,(code 4010)

17.Heater valve Calibration,(no code)

18.Maintenance — change windscreen wiper (300°) (no code)

19.Speed display calibration (no code)

Observe the calibration sequence.

Calibrations 1 to 9 as well as 17 to 19 can be performed in any order

Calibrations 10 to 15 must be performed in sequence and as a block

Fault code for calibration code 1001

F01 Preliminary conditions for calibration not  satisfied  A050 basic control unit ECU A050

F02 Calibrated values are faulty

F03 A100 MFA, multifunction armrest not responding

F08 Calibration taking too long (more than 30 seconds)

F09 User terminated calibration with "ESC"

Fault code for calibration code 1003

F01 Preliminary conditions for calibration not  satisfied  A050 basic control unit ECU A050

F02 Calibrated values are faulty

F03 A100 MFA, multifunction armrest not responding

F08 Calibration taking too long (more than 30 seconds)

F09 User terminated calibration with "ESC"

Fault code for calibration code 1004, 1005, 1006.

F01 Preliminary conditions for calibration not  satisfied  A050 basic control unit ECU A050

F02 Calibrated values are faulty

F03 A100 MFA, multifunction armrest not responding

F08 Calibration taking too long (more than 30 seconds)

F09 User terminated calibration with "ESC"

Fault code for calibration code 2401

F01 satisfied Preliminary conditions for calibration not

F04 Switching between “reverse operation” and “normal operation”

F08 Calibration taking too long (more than 30 seconds)

F09 User terminated calibration with "ESC"

F10 Plausibility of "center position" calibration value

F11 Plausibility of "left stop" calibration value

F12 Plausibility of "right stop" calibration value

F13 Plausibility of calibration values with each other

F20 Steering wheel sensor behavior for "center position" not as expected

F21 Steering wheel sensor behavior for "left stop" not as expected

F22 Steering wheel sensor behavior for "right stop" not as expected

Fault code for calibration code 2403

F01 Preliminary conditions for calibration not satisfied

F02 Front wheels are not straight

F03 Manual steering wheel actuation during calibration

F04 Switching between “reverse operation” and  “normal operation

F05 Handbrake not applied

F06 No movement in direction "steering to left"

F07 No movement in direction "steering to right"

F08 Calibration taking too long

F09 User terminated calibration with ESC

F11 Plausibility: Signal in direction "steering to left"

F12 Plausibility: Signal in direction "steering to right"

F30 Error when switching off  the spool position monitoring

F31 Error when switching the spool position monitoring back on

Fault code for calibration code 4001

F01 User terminated calibration with "ESC" 

F02 Pedal in rest position: Signal greater than allowed (22 mAdc)

F03 Pedal in rest position: Signal smaller than allowed (2 mAdc)

F04 Pedal fully depressed: Signal greater than allowed (22 mAdc)

F05 Pedal fully depressed: Signal smaller than allowed (2 mAdc)

F06 Calibrated min. and max. values are too close together

Minimum difference of 10 mAdc necessary

F07 Calibration taking too long (more than 30 seconds)

F08 Transmission in "Active standstill" (Remedy: Put transmission into neutral)